Protek Z580 LCR Meter

Description

Protek Z580 LCR Meter. Condition is "Used".
Protek Z580 Handheld LCR Meter, Handheld and Battery operated, Can be used for ESR measurements, 5 digit dual display LCD, Measures L, C, R, |Z|, Q /D, Displays Component value, Q or D, Δ, or Δ%, Auto ranging and Range hold, Built-in comparator with 4 Bin-sorting functions, Open and short circuit calibration for accurate zeroing, Series and Parallel equivalent circuit modes, 100Hz, 120Hz, 1KHz and 10KHz test frequencies, Warning alarm for Pass or Fail binning, Auto Power Off, Easy to use
Specifications
Measured Components
Measured Components
L (Inductance), C (Capacitance), R (Resistance) and Z (Impedance)
Measurement Circuit configurations
Series and Parallel
Measurements Resistance
Measured Parameter
R+Q and |Z|
Measurement Ranges
R: 0.0001W to 999.9 MW
Inductance
Measured Parameter
L+Q
Measurement Range
1µH to 9999H (100Hz & 120Hz)
0.1pF to 999.9pF (1KHz and 10KHz)
Capacitance
Measured Parameters
C+D
Measurement Range
1pF to 9999µF (100Hz and 120Hz)
0.1pF to 999.9pF (1KHz and 10KHz)
D or Q
Measurement Range
0.0001 to 9999
Test Environment
Test Voltages and Frequencies
0.3V (100Hz, 120Hz and 1KHz)
0.1V(10KHz)
Measurement rate
3 Measurements/sec Ranging Auto or Hold
Parameters Displayed
Primary Display
Measured value, Δ absolute, Δ&
Secondary Display
D or Q
Measurement Accuracy
Basic accuracy
± 0.3% (See user manual for accuracy conditions)
Zero input correction
Open and short circuit
General Specifications
Power Requirements
9 Volt rechargeable batteries or 12Volt @150mA AC to DC converter
Power Consumption
25 milliwatts
Operating Temperature
0 to 40ºC at ≤ 85% Relative Humidity
Dimensions Size
3.54"(W) x7.9"(H) x 1.5"(D)
Weight
1 lb
Accessories
Operating manual, 120V AC to 12V DC adapter, Test lead adapter with Kelvin clips, Rechargeable battery pack (installed)